
E-S 1000D Series Instruction Manual
Control Board Overview
5.6
Caution! Do not run power to the control board
other than the battery.
!
Gate Opener reactions to signals:
PUSH1 (PUSH 1 terminal, PUSH 1 button):
Details:
• Will activate gate with momentary contact (momentary contact between PUSH1 and
COM) or if you momentarily press the PUSH1 button.
• Controls both leaves in 2 leaf mode (Dip switch 2 in the ON position).
• Acts as party mode control to suspend auto-reclose by activating while counting down
auto reclose in the open position.
Operational Sequence for terminal with auto close ON (Dip switch 1 in on position):
1. In closed position - momentary contact will open gates.
2. When opening - momentary contact will stop gates and then it will auto reclose.
3. When stopped mid cycle waiting auto reclose - momentary contact will move the gate
in the direction opposite what it was moving before stopped.
4. When open and counting auto-reclose pause time - momentary contact will stop pause
time.
5. Stopped in open position from override of auto-reclose from PUSH1 or Receiver - mo-
mentary contact will reactivate pause time and close gate.
6. When closing - momentary contact will stop the gate and then it will auto reclose.
Operational Sequence for terminal with auto close OFF (Dip switch 1 in off position):
1. In closed position - momentary contact will open gates.
2. When opening - momentary contact will stop gates.
3. When stopped mid cycle - momentary contact will move the gate in the direction op-
posite what it was moving before stopped.
4. When open - momentary contact will close gates.
5. When closing - momentary contact will stop the gate.
6. When stopped mid cycle - momentary contact will open the gate.
7. When open with auto-reclose off - momentary contact will have no effect.
8. When closing - momentary contact will re-open the gate.
Komentarze do niniejszej Instrukcji