Estate Swing Instrukcja Obsługi Pobierz pdf (Strona 19)

IMPORTANT: Determining Correct Setback

2.10

PUSH TO OPEN - This operation is commonly used if you driveway slopes up after the

gate, preventing it from swinging in. This means the gate operator is mounted on the inside of

the property and pushes your gate out away from the property.

A B

7.5” 7.5” 90

7” 7” 100

6.5” 6.5” 110

To determine the position of the gate

mounting bracket (above is for the

post mounting bracket) refer to step

9 in the section “Installation of

operator - PTO”

To the right are 2 common examples

of setback mountings. These are not

the only options for mounting.

There a 3 factors to keep in mind

when finding the setback mounting:

1) The measurements must be correct

from the center of the hinge of the

gate to the center of the hole on the

mounting bracket.

2) There must be clearance for you

opener to attach to your gate in the

open position.

2) The brackets do not move or pivot

after mounting, if you can achieve the

setback and clearance then bracket

position is inconsequential.

It is best to C-Clamp brackets on and

test arm movement clearance before

permanently attaching them.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Brak uwag

Estate Swing Instrukcja Obsługi Strona 19