Estate Swing Instrukcja Użytkownika Pobierz pdf (Strona 11)

Programming User Access Phone 0umbers by

programming mode:

To enter programming mode:

1. Turn the power off to the unit with the power switch.

2. Using a 12V DC power source (a battery works well). Connect the positive of the power

to terminal 15 and the negative to terminal 11 (4 is also a ground).

3. Turn the power back on to the unit.

You will see the screen to the right. Once it displays

input guest the unit is in programming.

You can now have users call the GSM sim card

number. You only have the allotted amount of time

in the countdown before it automatically exits pro-

gramming mode.

When the guest calls you will see the guest’s

phone number and the position they are in.

Then it will display OK and reset the timer for

the next guest to call.

If the countdown reaches 0 before the next guest calls turn the power off and then back on to re-enter programming mode.

After you have finished programming turn off the unit and remove the 12V source from terminal 15 and ground. Then turn it

back on for normal operation.

Programming mode is a function in which users

can be programmed into the white list by their

caller id. When they call the gate the caller id

recognizes the phone number of the guest and

records it for future entry.

Please make sure all the users have their caller id

turned on. If when they call another phone the

caller id displays “private number” their caller id

is turned off.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

Brak uwag

Estate Swing Instrukcja Użytkownika Strona 11