Auxiliary: Land Line Only (cont)
Gate Control:
When a person presses the call button at the gate the #1 manager will receive a phone call from the front
gate. If they do not answer it will roll to the #2 and then to the #3.
______________________________________________________________________________________
In order to open the gate through Relay 1 (this is the primary relay that is normally hooked to the
gate opener) the administrator should press:
*0#
_________________________________________________________________
In order to open a secondary device through Relay 2 (this is the relay that is normally hooked to a pedes-
trian gate lock or other device) the administrator should press:
*1#
In order to disconnect the call from the gate without opening the gate (this would be if you did not want to
let the person in) the administrator should press:
*4#
This can also be used before hanging up after opening the gate to be sure that the network doesn’t hold the
call from the gate and waste minutes.
__________________________________________________________________________________
Temporary longer latch:
You can extend the time the gate pauses in the open position by extending the relay latch time for a single
use. This is helpful if you are driving a slow moving or long vehicle. It can be held for up to 65000 seconds.
Once the call has connected… (With a short beep ~ prompt the administrator to enter password, the initial set up password is
123456 by default)
After enter password… (Another short beep ~ Password Correct)
Press *6# (A short beep ~ success)
Continue press 1# for relay 1 (A short beep ~ success)
Then input value 00030# (A short beep ~ success)
Relay 1 will now latch for 30 seconds and after 30 seconds it will switch off and sends a message back to the administrator in-
formed that Relay 1 has closed.
__________________________________________________________________________________
Display Manager umbers:
Call the unit while someone is at the gate with the diagnostic screen plugged in. Press *7#.
Komentarze do niniejszej Instrukcji